We actually do not carry any wiring to tow your 2010 Toyota Prius because per the owner's manual (And all the other sources I've looked at) that vehicle cannot be towed with all 4 wheels on the ground. It has a Continuously Variable Transmission (CVT) which will be damaged during flat towing. Intsead it's recommended to tow the Prius on a dolly.
The Roadmaster # RM-2050-1 includes brakes. I recommend our # HS381-9000 kit because it includes everything you need. You may also need some... view full answer...
The Ultra-Fab Slide-Out Supports # UF19-960003 come in pairs and are designed to be used with one pair on each slide-out. Since you've got 2 slide-outs, you would need 2 pairs of the Ultra-Fab Slide-Out Supports. These supports are designed to support up to 1400-lbs per set and can be used on slides that have a height from the ground between 26" and 47" tall. view full answer...
The Tekonsha Plug-In Wiring Adapter # 3027-P will plug into the factory port on your 2009 Winnebago Journey 34Y motorhome. This will allow you to connect to the Tekonsha Prodigy P2 Trailer Brake Controller # 90885 without splicing any wiring. view full answer...
It looks like the Kwikee 909506000 part you're referring to is the control box. While most of the parts corresponding to this control box have been discontinued for anything built before 1999, we do have a solution for you on this.
Since it appears your steps would likely have been manufactured between 1999-2005 you will need an update of all the electronic components and can use Lippert Components Kwikee Step Motor Conversion/Upgrade Kit for your series 22 steps, # LC379145. This kit... view full answer...
All you're going to have to do to determine which trim insert you need s measure the available width inside your trim.
We currently carry 3/4" # CAM25262 and a 1" trim insert # CAM25202 for you to choose from. view full answer...